POWERED BY THE DENTISTRY NETWORK  network-DE network-RDH PIAsupernaviconnetwork-APEX

Chromium Cobalt

 

Non-precious, Low-cost Alternative to Create Individual Crowns and Multi-tooth Bridges

Strong, cost-effective, and provides a beautiful, natural aesthetic

  • Highly biocompatible (Nickel free)
  • Highly resistant to corrosion and heat
  • 10 micron knife edge margin right off the machine
  • No more metal casting problems – i.e. short margin, rocking, distortion, soldering, etc.
  • CE certified material – Made in Germany
  • Single crowns to 16-unit bridges
fdasdf
 ORIGIN® Cobalt-Chromium
Description:EMF-Disc on Cobalt base
Measure:

Ø 98,3 x 8 mm

Ø 98,3 x 10 mm

Ø 99,5 x 8 mm

B90-43

Lot / Batch NO.: 
Chemical Composition: 

sau-bao-lau-phai-lam-lai-chup-rang-3

 

 
 
Co%Cr%W%Mn%Fe%Si%C%
61,0%28,0%8,5%0,25%<0,5%1,65%<0,1
Typical Technical Data:  
Density:   8,3 g/cm3
E-modul: 190.000 MPa ( N/mm-² )
Melting Point (Solidus/Liquidus): 1.390 – 1.415°C

CTE (Coefficient of Thermal Expansion, 10-6 • K-1):

 14,1 μm/K ( 20 – 600°C )
Extension: 10%
Hardness: 285 HV 10
Norm: 

DIN EN ISO 22674:2006, Type 4

Production and examination according to

DIN EN ISO 13485 / DIN EN ISO 9001:2008

with appendix V MP-recommendation 93/42/EWG

Gọi
Maps
Chat